Wednesday, September 16, 2009

Pyramid Favor Box for SCAL Users

I found this instruction sheet for a Pyramid Favor Box at Jo-Ann's some time ago.    It notes that it is courtesy of Inkadinkado (I think because the project sheet has you stamping on your project after you have it cut out but before you put it together.) I finally got around to tracing the pattern off the back, scanned it in, pulled it into Inkscape and made an .svg pattern with it for use with SCAL.  I had to handtrace the original since it is printed lightly on the back with the written instructions over the top of it. (Hate when they do that - makes it hard to use!)

I usually use the red liner tape available at Walmart or any craft store to put my boxes and or bags together so that I know that they will "stay" together once I have put treats in them.

Special Notes: * the "sides" where you do the folds seem to be a little longer (taller) then the front and back sides (maybe it's just my folding). Once you fold them in and glue the "sides" to the front and back trim off any extra length by hand.  It's just a quick snip. *  Also, you'll need to "pinch in" the sides of the box to allow for the front closure flap to pull over the top correctly. * see the attached photo that shows you where to score and fold (basically you score on the triangle sides and the middle square). Click on picture to see it better and in larger size.

Here are two sample boxes that I made to try the pattern out. 

Notice in the last  picture posted here how I have "pinched" in the sides of the box to allow for the top flap to come over and down properly.

Remember, you IMPORT an .svg file into SCAL.  You OPEN a .scut file with SCAL.  Neither .svg nor .scut files can be used with Design Studio (DS). 

Thanks for looking.  As always, I'd love to see any projects that you create with this file.
Approximate finished size of the project is 3" x 3 1/2" x 1 1/2"
at